top of page

Vanity units are a great addition to your bathroom or downstairs toilet, if you want something a little different to hide away pipework whilst maintaining practical storage then this is the answer for you.


Our cabinets have been produced using the same traditional methods for over thirty years, the same care and attention to detail goes into any piece of our furniture from kitchens, to vanity units.


The Heathfield is a double basin unit, it has room for two basins which is available to purchase seperately. The unit has two sets of double doors and one fixed shelf within. If you choose a basin then the two drawers will be fully operational. If you choose the undermounted sink option then the drawer fronts will be fixed panels. Both options have open shelving below which can accomodate baskets or storage boxes.


The drawers, if selected, will run on soft close runners ensuring a smooth closing. The drawers themselves are manufactured from solid maple and maple faced mdf for the base, all internal surfaces are finished with two coats of lacquer ensuring you can keep them clean and protected. All drawers are handmade using traditional methods with dovetailed joints front and back.


The traditionally made cabinet is handmade using birch faced ply and tulip wood for solid construction, housing joints are used to remove movement of timber. This method of construction ensure years of use.


Dimensions of unit to fit a counter top basin:


PLEASE NOTE: The Tunbridge Wells has 13mm skirting around the base which adds 26mm to the width selected in the drop down menu and 13mm to the depth shown below:



450mm, without counter top

460mm, with counter top

463mm, with skirting



750mm, without counter top

770mm, with Quartz or Carrara Marble

770mm, with 75mm full stave Oak top


Dimensions of unit to fit an under mount basin:



550mm, without counter top

560mm, with counter top

563mm, with skirting



850mm, without counter top

870mm, with Quartz or Carrara Marble

870mm, with 75mm full stave Oak top

The Tunbridge Wells


    Counter Top Basins:


    - A round basin is included as standard when this option is selected


    - For units 1400mm or narrower, the basin measurements are as follows:

    Diameter: c358mm, Height c155mm


    - For units 1500mm or wider, the basin measurements are as follows:

    Diameter: c400mm, Height: c155mm


    Under Mount Basins:

    - An oval under mount basin is included as standard when this option is selected


    - The basin measurements are as follows for units 1400mm in width or wider:

    Width: c500mm, Depth: c420mm Height: c120mm


    - And for our 1200mm and 1300mm units the basin size would be as follows:

    Width: c390mm, Depth: c260mm Height: c120mm


    No Basin:

    If you select the 'No Basin' option, your unit will be built and supplied to fit a counter top basin with a 80mm central hole cut out in the counter top (if one has been selected) for the waste connections. 


    Please click here for further information on basins.

bottom of page